Cisco MCS 7800 Series Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco MCS 7800 Series. Cisco MCS 7800 Series 4 pages. Multiplatform phones
Également pour Cisco MCS 7800 Series : Manuel de démarrage rapide (12 pages), Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur final (6 pages), Manuel de démarrage rapide (2 pages), Référence rapide (2 pages), Manuel principal de migration des microprogrammes (31 pages), Manuel de démarrage rapide (2 pages), Manuel (43 pages), Commencer (6 pages), Manuel d'installation (39 pages), Manuel (20 pages), Manuel de démarrage rapide (2 pages)

Adjust Your Phone on Your Desk

•

Change the Viewing Angle of Your Phone (7800 Series)

You can change the angle of the phone, except the Cisco IP Phone 7811, to eliminate glare on the screen.

Procedure

Step 1

Unplug the phone from the network.

Step 2

Place the phone so that the keypad faces the desktop.

Step 3

Grasp one side of the footstand with one hand and place your other hand on the phone.

Step 4

Hold down the phone and pull up on the footstand.

Step 5

Turn the footstand over.

Step 6

Push the footstand back into the phone until the stand locks into place.

Step 7

Place the phone upright and plug it into the network.

Change the Viewing Angle of Your Phone (8800 Series)

You can change the angle of the phone to eliminate glare on the screen. If your phone has a video camera,

you can change the angle to improve the camera view.

Procedure

Step 1

Hold the receiver in the cradle with one hand.

Step 2

Move the footstand with the other hand to change the angle.

Change the Viewing Angle of Your Phone (7800 Series), on page 1

Change the Viewing Angle of Your Phone (8800 Series), on page 1

Adjust the Handset Rest, on page 2

Secure the Phone with a Cable Lock (8800 Series), on page 2

Adjust Your Phone on Your Desk