Cisco MCS 7800 Series Manuel

Konferans Sistemi Cisco MCS 7800 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco MCS 7800 Series 4 sayfaları. Multiplatform phones
Ayrıca Cisco MCS 7800 Series için: Hızlı Başlangıç Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Son Kullanıcı Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Referans (2 sayfalar), Ürün Yazılımı Geçişi Ana Kılavuzu (31 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Manuel (43 sayfalar), Başlayın (6 sayfalar), Kurulum Kılavuzu (39 sayfalar), Manuel (20 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Adjust Your Phone on Your Desk

•

Change the Viewing Angle of Your Phone (7800 Series)

You can change the angle of the phone, except the Cisco IP Phone 7811, to eliminate glare on the screen.

Procedure

Step 1

Unplug the phone from the network.

Step 2

Place the phone so that the keypad faces the desktop.

Step 3

Grasp one side of the footstand with one hand and place your other hand on the phone.

Step 4

Hold down the phone and pull up on the footstand.

Step 5

Turn the footstand over.

Step 6

Push the footstand back into the phone until the stand locks into place.

Step 7

Place the phone upright and plug it into the network.

Change the Viewing Angle of Your Phone (8800 Series)

You can change the angle of the phone to eliminate glare on the screen. If your phone has a video camera,

you can change the angle to improve the camera view.

Procedure

Step 1

Hold the receiver in the cradle with one hand.

Step 2

Move the footstand with the other hand to change the angle.

Change the Viewing Angle of Your Phone (7800 Series), on page 1

Change the Viewing Angle of Your Phone (8800 Series), on page 1

Adjust the Handset Rest, on page 2

Secure the Phone with a Cable Lock (8800 Series), on page 2

Adjust Your Phone on Your Desk