Cisco MCS 7800 Series 매뉴얼

{카테고리_이름} Cisco MCS 7800 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MCS 7800 Series 4 페이지. Multiplatform phones
Cisco MCS 7800 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (2 페이지), 최종 사용자 설명서 (6 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 참조 (2 페이지), 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (43 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (2 페이지)

Adjust Your Phone on Your Desk

•

Change the Viewing Angle of Your Phone (7800 Series)

You can change the angle of the phone, except the Cisco IP Phone 7811, to eliminate glare on the screen.

Procedure

Step 1

Unplug the phone from the network.

Step 2

Place the phone so that the keypad faces the desktop.

Step 3

Grasp one side of the footstand with one hand and place your other hand on the phone.

Step 4

Hold down the phone and pull up on the footstand.

Step 5

Turn the footstand over.

Step 6

Push the footstand back into the phone until the stand locks into place.

Step 7

Place the phone upright and plug it into the network.

Change the Viewing Angle of Your Phone (8800 Series)

You can change the angle of the phone to eliminate glare on the screen. If your phone has a video camera,

you can change the angle to improve the camera view.

Procedure

Step 1

Hold the receiver in the cradle with one hand.

Step 2

Move the footstand with the other hand to change the angle.

Change the Viewing Angle of Your Phone (7800 Series), on page 1

Change the Viewing Angle of Your Phone (8800 Series), on page 1

Adjust the Handset Rest, on page 2

Secure the Phone with a Cable Lock (8800 Series), on page 2

Adjust Your Phone on Your Desk