Sony 2005 SXRD KDS-R50XBR1 Manuel de démontage - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démontage pour {nom_de_la_catégorie} Sony 2005 SXRD KDS-R50XBR1. Sony 2005 SXRD KDS-R50XBR1 31 pages.

Imprimer la page

Chapter 2 - Rear & Sub Plastic Cover Removal

Screws

Bracket

CN2006

CN2010

Rear and Sub Plastic Cover Removal & ASU-Board Access

Screws

Disconnect

fan cable

behind cover

Screws

Release Wire Tie

CN2100

Detach

AC Cord

Shields

S1-Board

Remove 9 screws and pull rear

plastic cover straight back and

off.

Remove 5 screws and detach

AC cord from the slot . Pull sub

plastic cover slowly straight

back and off.

NOTE:

Be careful of fan wire

and connector behind sub-

cover. Disconnect fan cable to

completely remove cover.

Remove 4 screws and release

the one wire tie. Slide the

bracket up slightly and pull off.

Disconnect the S1-Board

Remove both shields to access

the ASU-Board.

The ASU-Board can be probed

for troubleshooting at this point

of the disassembly process. It

can not be remove at this point .

Reference "ASU & G-Board

Removal" section.