DigiTech BASS MULTI CHORUS Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DigiTech BASS MULTI CHORUS. DigiTech BASS MULTI CHORUS 12 pages. Digital multi voice chorus
Également pour DigiTech BASS MULTI CHORUS : Manuel (12 pages)

Imprimer la page
DigiTech BASS MULTI CHORUS Manuel

Battery Replacement

1. Using the tip of a 1/4" cable, push one of the release pins in on either
side of the pedal, and remove the pedal from the pedal chassis.
2. Remove the battery from the battery compartment and disconnect
the battery cable.
3. Connect a new battery to the battery cable and put it back in the
battery compartment. Make sure the battery cable does not interfere
with the spring or pedal switch arm.
4. Place one hole of the pedal over its corresponding pin.
5. Push the opposite pin in and lower the other side of the pedal into
place over the depressed pin. Release the pin. When the pedal is
properly fastened, both release pins are flush with the outer side of
the pedal.