DigiTech BASS MULTI CHORUS 매뉴얼 - 페이지 10

{카테고리_이름} DigiTech BASS MULTI CHORUS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiTech BASS MULTI CHORUS 12 페이지. Digital multi voice chorus
DigiTech BASS MULTI CHORUS에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄
DigiTech BASS MULTI CHORUS 매뉴얼

Battery Replacement

1. Using the tip of a 1/4" cable, push one of the release pins in on either
side of the pedal, and remove the pedal from the pedal chassis.
2. Remove the battery from the battery compartment and disconnect
the battery cable.
3. Connect a new battery to the battery cable and put it back in the
battery compartment. Make sure the battery cable does not interfere
with the spring or pedal switch arm.
4. Place one hole of the pedal over its corresponding pin.
5. Push the opposite pin in and lower the other side of the pedal into
place over the depressed pin. Release the pin. When the pedal is
properly fastened, both release pins are flush with the outer side of
the pedal.