Argo DD Manuel d'instructions d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Argo DD. Argo DD 16 pages. Air conditioner without outdoor unit
Imprimer la page
- Insert in the two holes the obtained plastic tubes.
EN
- Fix the two anti-intrusion grilles and the two external
grilles with the blades toward the bottom using wall rawl
plugs and screws.
- In case it is not possible to fix the two external grilles
directly at the wall, hook the two grilles to the internal
ones (3) using the supplied tension bars, as follows:
a) Bend them, fix the hook of the spring, insert them
inside the tube and open them toward the outside.
b) Choose the proper hook of the tension bar in order
to lengthen the spring of 15-20 mm and hook it to
the internal grille.
c) Eliminate the exceeding part of the tension bar cutting
it near the hooking points.
- Apply the supplied gaskets (9) around the holes on the
back side of the unit.
9
- In case of very thin walls (less than 10 cm) it is necessary
to mount the internal anti-intrusion grilles on the back
of the unit applying the gaskets (9) around the grilles.
Unscrew the screws on the back of the unit and fix the
grilles using the same screws.
The tube and the external grilles will not be used.
CAUTION
The manufacturer assumes no
responsibilities if this safety
instruction is not observed.
9
3
INSIDE
3
8
OUTSIDE
Spring
hook
3
9