Argo FCW03 Manuel d'utilisation et d'installation - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Argo FCW03. Argo FCW03 20 pages. Fan coil unit wall mounted type
Imprimer la page
(3) Using the controller, the FCU can select the COOL, HEAT, FAN, DRY to check whether the operation
is normal or not.
(4) Leave test mode to pressing "ON/OFF" button on the controller.
(5) During 5 minute, the FCU would leave test mode automatically without pressing any button.
(6) Switch off the FCU, pressing "ON/OFF" button on the controller.
3.3 Air Discharge
If it is necessary to discharge air, follow the steps below.
(1) Remove the screw.
(2) Remove the plastic cover.
(3) Turn the valve plug anticlockwise three or four circles (shown as the ON direction on the plate).
(4) Start the fan coil unit up.
Turn the valve plug clockwise to tight (shown as the OFF direction on the plate). Fix the plastic cover
with the screw.
3.4 Maintenance
3.4.1 Emergency Operation
When the wireless remote control is lost or damaged, please use the AUTO button. At this time, sketch
map for changing batteries cassette type fan coil unit 9 the unit will operated as follow:
(1) At operation: When the unit stop, press AUTO button over 5 seconds to start the unit.
(2) At stopping: When the unit is running, press AUTO button and overrun 5 seconds to stop the unit.
(3) When the unit is running, press AUTO button less than 5 seconds. The unit select from COOL, DRY,
FAN, HEAT, COOL modes automatically.
Srew
Valve plug
Valve plug
Fan Coil Unit Wall Mounted Type
Plastic cover
36