Argo FCW03 사용자 및 설치 설명서 - 페이지 15

{카테고리_이름} Argo FCW03에 대한 사용자 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo FCW03 20 페이지. Fan coil unit wall mounted type

Argo FCW03 사용자 및 설치 설명서
(3) Using the controller, the FCU can select the COOL, HEAT, FAN, DRY to check whether the operation
is normal or not.
(4) Leave test mode to pressing "ON/OFF" button on the controller.
(5) During 5 minute, the FCU would leave test mode automatically without pressing any button.
(6) Switch off the FCU, pressing "ON/OFF" button on the controller.

3.3 Air Discharge

If it is necessary to discharge air, follow the steps below.
(1) Remove the screw.
(2) Remove the plastic cover.
(3) Turn the valve plug anticlockwise three or four circles (shown as the ON direction on the plate).
(4) Start the fan coil unit up.
Turn the valve plug clockwise to tight (shown as the OFF direction on the plate). Fix the plastic cover
with the screw.

3.4 Maintenance

3.4.1 Emergency Operation
When the wireless remote control is lost or damaged, please use the AUTO button. At this time, sketch
map for changing batteries cassette type fan coil unit 9 the unit will operated as follow:
(1) At operation: When the unit stop, press AUTO button over 5 seconds to start the unit.
(2) At stopping: When the unit is running, press AUTO button and overrun 5 seconds to stop the unit.
(3) When the unit is running, press AUTO button less than 5 seconds. The unit select from COOL, DRY,
FAN, HEAT, COOL modes automatically.
Srew
Valve plug
Valve plug
Fan Coil Unit Wall Mounted Type
Plastic cover
36