Argo SDIBS9DC Manuel d'instructions d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Argo SDIBS9DC. Argo SDIBS9DC 19 pages. Split air conditioner system
Également pour Argo SDIBS9DC : Manuel d'utilisation (15 pages), Manuel d'utilisation (17 pages)

Imprimer la page

Remove the electrical box cover to operate on the

terminal strip.

Predispose the condensate drain pipe and attach it

to the fan hausing if necessary.

Predispose the terminals of the wire to connect to

the terminal strip and connect them. (See electric

wiring to connect).

Secure inter-unit wire using the supplied clamp.

Loose wiring may cause the terminal to overheat

or result in unit malfunction.

A fire hazard may also exist. Therefore, be sure

all wiring is tightly connected.

When closing the electrical component box, take

care not to leave part of the wires out or let them

get caught between the lid and the unit. Check

to see that the tab is aligned, then tighten the

screw.

Install the condensate drain to the outside with a

positive slope.

WARNING