Cablematic WL2001 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cablematic WL2001. Cablematic WL2001 5 pages. Gsm emergency alarm system

Imprimer la page
Well SEC Electronic Co.,Ltd
Symptoms
Cannot alarm by phone
Remote controlling distance is too
short and the light indicator is not on
strong enough
Light indicator of door sensor and
PIR is always on.
Dial alarm num slowly
The main panel cannot receive
accessories signals
Notice：
■Don't install the system beside the strongly disturbing equipments like motor, computer etc.
■Should be installed in a concealed place.
■Should be plug firmly and ensure well dissipation
■Only designed for indoor
Ver 1.1
Causes
1.
Hasn't armed
2.
Less than 30 seconds after arming.
3.
Set wrong phone num
4.
The two parts of door\window
sensor is installed too far from
each other.
5.
Haven't activated PIR.
6.
Hasn't checked code
1.
The battery of remote controller
2.
Low battery
Low battery
The main panel has stored others num
Hasn't checked code
- 5 -
www.wellsecurityalarm.com
Remedies
1.
Make arming
2.
Operate after 30 seconds
3.
Set the num again according to
the manual
4.
Adjust the installation place of
the door sensor
5.
Activate the PIR
6.
Check code again
1.
Clean the rust
2.
Change battery
Change battery
Set it again according to the
operation manual
1.
Check the code again