Cablematic WL2001 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cablematic WL2001. Cablematic WL2001 5 pages. Gsm emergency alarm system

Imprimer la page

Well SEC Electronic Co.,Ltd

Plug off 12V supply from alarm system.

Plug on 12V supply at alarm system again, alarm LED will have a brief flash.

Release reset button and let system LED to become green.

Now system is reset and back to factory settings.(the passwords is 1234)

2. Setting telephone numbers

Delete all the telephone numbers in the SIM card, and put the 1~5 groups telephone No. Each

group cannot over 16 digitals.

3. Program the system functions

Call the alarm system. After one ring the host answer and a beep will be heard.

You have to input a PIN code and # at the end for security purpose. Default PIN is 1234.

At first log in, please dial 1234#.

NOTICE! This PIN code is for alarm system NOT for SIM card.

System responds with sound "beep" (digital voices are available for some areas) and then you can

input the following commands:

5# : set SMS function on (default)

5*: set SMS function off

6# - set with phone function on when alarming

6* - set without phone function when alarming

8#abcd#: set new PIN. E.g.: 8#8686# --set new PIN code as 8686.

Note: It is wise to change PIN code at first login in alarm system.

9* : Monitoring the spot voice.

9# : stop monitoring

0# : arm the system

0* : disarm the system

4. Using the system

⑴ Arm:

When you press, "

arming status, at this moment, it will alarm and dial out if you remove the door sensor, switch the PIR

sensor, go across from the front of camera and so on. The LED will turn to red, which shows it is in

alarming status.

⑵ Disarm

When you press, "

alarm and dial out.

⑶ Emergency help

When you press "

", the signal LED will be red with flashing, which means it is in alarming status .

Ⅴ. Standard components and optional available components

1. Basic Kit contains:

Alarm system (alarm host) – 1 pc.

Power supply with back-up – 1pc.

Users' Manual- 1pc

The following sensors can be optional:

Optional sensors/detectors are packed separately. It includes remote controllers,

wireless PIR, wireless gap sensor, wireless gas detector, wireless smoke detector, panic

button, baluster, etc. you may buy according your specific requirements.

Ver 1.1

", the signal LED of control unit will be turned green with flashing. It shows it is in

", the signal LED will be turned green and does not flash. At this moment, it won't

- 3 -