Argo HI FLOOR DESIGN Mode d'emploi - Page 3

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Argo HI FLOOR DESIGN. Argo HI FLOOR DESIGN 5 pages. Electric convection heater

Argo HI FLOOR DESIGN Mode d'emploi
WARNING: do not use the convector with an external controller or any other external device that activates the
convector automatically, as there may be a risk of fire if the convector is covered or incorrectly positioned.
 Upon initial start-up, the convector may emit a slight, harmless smell. This smell is a normal effect of the initial heating
up of the internal heating elements, and should not recur later on.
 Do not attempt to repair, disassemble or modify the convector. The convector does not contain parts that can be
repaired by the user.
 Turn the switch off and unplug before carrying out any maintenance work or moving the convector. Always unplug from
the socket when the convector is not in use.
WARNING: ALWAYS UNPLUG WHEN CARRYING OUT MAINTENANCE WORK OR MOVING THE CONVECTOR.
 Do not place anything on the convector; avoid placing wet garments on the convector.
 Turn the appliance off if unattended in order to avoid accidents.
 If the convector is not used for prolonged periods, disconnect the plug, replace the convector in its box and store it in a
dry, ventilated place.
 Ensure that the air inlet /outlet are not close to walls or curtains when the convector is in use, so as to avoid obstructing
the convector and hampering its efficiency.
 Should you hear an abnormal noise or detect an unusual smell when using the convector, cease use and unplug
immediately.
 Do not expose the elderly or children to a continuous flow of air.
 Do not use the convector if it has been damaged or dropped.
WARNING:
THE ON/OFF SWITCH IS NOT THE ONLY MEANS TO DISCONNECT THE POWER SUPPLY. ALWAYS PULL OUT
THE PLUG FROM THE SOCKET IN THE EVENT OF MAINTENANCE OPERATIONS, WHEN MOVING THE PANEL
OR WHEN NOT IN USE.
H
A
B
E
The convector is available in two different versions:
HI FLOOR DESIGN – Min./med./max. power 750/1250/2000 W – Thermostat and power selector with turbo
HI FLOOR DESIGN PLUS - Min./med./max. power 750/1250/2000 W – Thermostat and power selector
V 05/11

DESCRIPTION OF PARTS

G
C
D
F
with turbo and 24h timer.
A. Power level selector
o = OFF
I = 750 W (min.)
II = 1250 W (med.)
III = 2000 W (max.)
B. Thermostat
- min (minimum temperature)
- max (maximum temperature)
C. Turbo switch (forced ventilation)
D. Forced air outlet (Turbo feature)
E.
Timer 24h (HI FLOOR DESIGN PLUS model)
F.
Feet
G.
Top grille for air outlet
H.
Carrying handles
8