Cisco 6160 Notes sur l'installation et le remplacement

Parcourez en ligne ou téléchargez le pdf Notes sur l'installation et le remplacement pour {nom_de_la_catégorie} Cisco 6160. Cisco 6160 18 pages. Without a pots splitter configuration
Également pour Cisco 6160 : Manuel de référence rapide (38 pages), Manuel d'installation du matériel (21 pages), Manuel de procédures d'installation (32 pages)

Cisco 6160 Notes sur l'installation et le remplacement
Cisco 6160 PEM FRU Installation and
Replacement Notes
Product Number: 6160-1-PEM-DC=
This document provides an overview of and installation and replacement procedures for the Cisco 6160
power entry module (PEM). The PEM is a field-replaceable unit (FRU) in the Cisco 6160 chassis.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Contents
This document includes the following sections:
Introduction, page 1

Introduction

The Cisco 6160 chassis is equipped with one or two -48VDC PEMs, which distribute direct current (DC)
power within the chassis. The Cisco 6160 needs only one active PEM to operate; if two PEMs are
installed, a secondary PEM serves as a hot backup to the first PEM.
Each PEM should be connected to a single DC power source. For full power redundancy, two PEMs must
be installed and connected to two separate DC power sources.
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2002. Cisco Systems, Inc. All rights reserved.