Cisco 6160 Installation And Replacement Notes

Browse online or download pdf Installation And Replacement Notes for Network Hardware Cisco 6160. Cisco 6160 18 pages. Without a pots splitter configuration
Also for Cisco 6160: Quick Reference Manual (38 pages), Hardware Installation Manual (21 pages), Installation Procedures Manual (32 pages)

Print Page

Cisco 6160 PEM FRU Installation and

Replacement Notes

Product Number: 6160-1-PEM-DC=

This document provides an overview of and installation and replacement procedures for the Cisco 6160

power entry module (PEM). The PEM is a field-replaceable unit (FRU) in the Cisco 6160 chassis.

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Warning

Contents

This document includes the following sections:

•

•

•

The Cisco 6160 chassis is equipped with one or two -48VDC PEMs, which distribute direct current (DC)

power within the chassis. The Cisco 6160 needs only one active PEM to operate; if two PEMs are

installed, a secondary PEM serves as a hot backup to the first PEM.

Each PEM should be connected to a single DC power source. For full power redundancy, two PEMs must

be installed and connected to two separate DC power sources.

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA