Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Note d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Note d'installation pour {nom_de_la_catégorie} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 46 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Également pour Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion : Note d'installation (14 pages), Manuel de solution (17 pages), Livre blanc (19 pages), Description (1 pages), Bulletin d'information sur les produits (6 pages), Avis (4 pages), Fiche technique (9 pages), Fiche technique (18 pages), Livre blanc (18 pages), Manuel de configuration (8 pages), Note d'installation (28 pages), Manuel de dépannage (11 pages), Note d'installation (18 pages), Manuel de l'utilisateur (17 pages), Note d'installation (24 pages), Manuel (19 pages), Note d'installation (36 pages)

Removing a CFC or DFC Daughter Card

Figure 1

CFC Daughter Card Installation Hardware

Cap nuts (2)

Card removal

tabs (2)

CFC daughter card

Heat sinks

Screws (3)

WS-X5530

To unseat the CFC daughter card from the Ethernet module, hold each tab at the rear of the CFC daughter

Step 5

card between your thumb and index finger, and gently press down on both tabs until the connectors are

unseated. (See

Figure

2.)

Caution

Do not apply too much pressure on the tabs because you might cause damage to the module.

Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note

78-15893-08