Cisco 7505 Manuel de démarrage rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 7505. Cisco 7505 32 pages. 600w ac-input power supply and fan tray replacement
Également pour Cisco 7505 : Manuel d'instructions de remplacement (23 pages), Manuel d'instructions d'installation (15 pages), Manuel d'instructions de remplacement (18 pages)

Install the Hardware

Connect the Power Supply

The Cisco 7505 router supports AC-input and DC-input power supplies. The power supply is already installed

in the router when you receive it. You connect the power to it.

Note

The AC-input power supply is the shipped as the default if no power supply is speciﬁed at the time of

purchase.

Connect the AC-Input Power Supply

On/off switch

AC receptacle

Cable retention

clip

Step 1

Push the cable retention clip away from the power supply receptacle, and push the power cable in

until the cable retention clip snaps into place.

Step 2

Connect the opposite end of the power cable to an appropriate power source.

Connect the DC-Input Power Supply

Terminal block

(cover removed)

Step 1

Turn off the power source. Locate the circuit breaker on the panel board that services the DC circuit,

and switch it off, then tape the switch handle of the circuit breaker in the off position.

On/off switch

DC OK LED