Cisco 7505 Manuel de démarrage rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 7505. Cisco 7505 32 pages. 600w ac-input power supply and fan tray replacement
Également pour Cisco 7505 : Manuel d'instructions de remplacement (23 pages), Manuel d'instructions d'installation (15 pages), Manuel d'instructions de remplacement (18 pages)

Imprimer la page

Install the Hardware

—

-48/-60V

20/16A

-48

RTN

Terminal block

cover and

captive screws

Cable strain relief

nylon cable tie

Step 2

Loosen the two captive screws that secure

the terminal block cover, as shown in A.

Step 3

Pull the terminal block cover away from

the terminal block, as shown in B.

Step 4

Feed the return (RTN) and –48V wires

through the large hole in the terminal

block cover, as shown in C.

Step 5

Attach a nylon cable tie to secure the

cables to the terminal block cover.

Step 6

Attach the RTN and –48 leads to the

terminal block, as shown in C.

Caution: Do not strain the connection at the terminal block

-48/-60V

20/16A

RTN

-48/-60V

20/16A

RTN

Ground

terminal

Note

Match the color coding at the DC source.

Typically, green or green/yellow is used for ground,

black is used for RTN, and red or white is used for

–48V.

Step 7

Attach the ground cable to the ground

terminal.

Step 8

Replace the terminal block cover, as

shown in B.

Step 9

Tighten the captive screws on the terminal

block cover, as shown in A.

—

-48

—

-48