Sony PMW-100 Manuel d'utilisation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony PMW-100. Sony PMW-100 32 pages. Solid-state memory camcorder
Également pour Sony PMW-100 : Brochure & Specs (8 pages), Brochure & Specs (6 pages), Pour commencer (2 pages), Manuel d'utilisation (31 pages)

Imprimer la page

Adjusting the LCD

Monitor and Viewfinder

Adjusting the LCD Monitor

The LCD monitor turns on when it is opened and

turns off when it is returned to the park position.

Adjusting the angle

It can be rotated as much as 90 degrees in the

direction facing the subject and as much as 180

degrees in the opposite direction.

When you rotate it 90 degrees toward the subject,

the image on the monitor becomes upside down,

indicating the mirror image of the subject. The

display direction of the textual information is

converted to the readable direction.

Adjusting the color, contrast, and

brightness

These adjustments can be made using "LCD"

("Menu Configuration and Detailed Settings" in

operating instructions (PDF)) in the LCD/VF

SET menu. These adjustments of the LCD

monitor have no effect on pictures being

recorded.

Adjusting the Viewfinder

If the picture on the LCD monitor is hard to view

under bright ambient light, you can use the

viewfinder to check the picture.

Caution

Do not leave the camcorder with the eyepiece of

the viewfinder facing the sun. Direct sunlight can

enter through the eyepiece, be focused in the

viewfinder, and cause fire.

Hereafter the viewfinder is referred to as "EVF"

(abbreviation of Electronic Viewfinder).

Turning the EVF on/off

With the factory setting, the EVF is turned on

when the LCD monitor is in its park position or is

rotated to face the subject.

You can change the setting so that the EVF is

always on regardless of the status in the LCD

monitor, using "EVF" ("Menu Configuration and

Detailed Settings" in operating instructions

(PDF)) in the LCD/VF SET menu. Change the

"Power" setting from "Auto" to "On."

Adjusting the focus in the EVF

The eyepiece focusing (diopter compensation)

knob (page 9) (PMW-200) / (page 9) (PMW-100)

enables adjustment to match the eyesight of the

operator, who can then view the image clearly

through the eyepiece.

Adjusting the backlight

The brightness of the backlight for the EVF can

be switched between High and Low.

Set "Backlight" in "EVF" ("Menu Configuration

and Detailed Settings" in operating instructions

(PDF)) in the LCD/VF SET menu.

Adjusting the contrast and brightness

Use "EVF" ("Menu Configuration and Detailed

Settings" in operating instructions (PDF)) in the

LCD/VF SET menu to make adjustments.

Adjusting the brightness and other items has no

effect on pictures being recorded.