Sony SRG-300SE Manuel technique - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Sony SRG-300SE. Sony SRG-300SE 42 pages. Hd color video camera
Également pour Sony SRG-300SE : Manuel technique (41 pages), Manuel d'installation (2 pages)
Imprimer la page
Initial Settings and Preset
• The initial values are the factory settings.
• When you send the CAM Memory Reset command, the selected number is set as initial value.
• The preset 1 is the CAM Memory number "0" in the VISCA command. The preset 2 to 16 are the CAM Memory
number "1 to 15" in the VISCA command.
Items stored to presets
Pan/Tilt Position
Zoom Position
Focus Mode Auto/Manual
Focus Position
Backlight Compensation ON/OFF
Exposure mode
WDR (View-DR)
Auto slow shutter
Bright level
Shutter speed
Iris
Gain
Exposure compensation
Exposure compensation value
White balance mode
Aperture value
Digital zoom On/Off
Day/Night ICR function status
* The settings of preset numbers 17 to 256 are available for the setting via a network only.
Setting items retained in the memory when the power is turned off and then on again.
— Setting items cleared from the memory when the power is turned off and then on again.
Items stored when operating the camera
• Gain limit value
• High resolution mode
• Noise reduction
• Mode of the Day/Night ICR function
• Image stabilizer
• Pan-Tilt limit
• Slow Pan-Tilt mode
• DISPLAY INFO
The setting items other than the above mentioned are retained when they are enabled in each tab of the menus
with the operation via a network.
The stored and retained setting items are retained in the memory when the power is turned off and then on
again.
The camera starts with the settings stored in POSITION 1 and the settings stored when last operated when the
power is turned on.
Notes
• The execution of memory to the preset is limited.
• The setting or deleting of memory to/from POSITION1 takes approx. 2 seconds longer than other channels.
• In CameraID, the data is stored regardless of the preset.
• When ImageFlip is executed, all presets are reset to the initial value.
Preset position number
Initial settings
1 to 16
Home position
Wide end
Auto
—
Off
Full Auto
Off
Off
—
—
—
—
Off
±0
Auto
8
On
Off
17 to 256*
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Basic Functions
10