Cisco ASA 5506-X Manuel d'installation du matériel - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco ASA 5506-X. Cisco ASA 5506-X 26 pages. Threat defense reimage guide
Également pour Cisco ASA 5506-X : Manuel de démarrage rapide (10 pages), Manuel de démarrage rapide (14 pages), Manuel d'installation facile (11 pages), Manuel du logiciel (37 pages), Monter et connecter (12 pages), Manuel d'installation (46 pages), Montage du châssis (10 pages)

Prepare for Installation

Power Supply Considerations

When installing the ASA, consider the following:

• Check the power at the site before installing the chassis to ensure that it is "clean" (free of spikes and

• Install proper grounding for the site to avoid damage from lightning and power surges.

• The ASA chassis does not have a user-selectable operating range. Refer to the label on the chassis for

• Install an uninterruptible power source for your site, if possible.

Consider the following when planning an equipment-rack configuration:

• If you are mounting a chassis in an open rack, make sure that the rack frame does not block the intake

• Be sure enclosed racks have adequate ventilation. Make sure that the rack is not overly congested as

• In an enclosed rack with a ventilation fan in the top, heat generated by equipment near the bottom of

• Baffles can help to isolate exhaust air from intake air, which also helps to draw cooling air through the

Online Only

noise). Install a power conditioner, if necessary, to ensure proper voltages and power levels in the

appliance-input voltage.

the correct appliance input-power requirement.

or exhaust ports.

each chassis generates heat. An enclosed rack should have louvered sides and a fan to provide cooling

air.

the rack can be drawn upward and into the intake ports of the equipment above it in the rack. Ensure

that you provide adequate ventilation for equipment at the bottom of the rack.

chassis. The best placement of the baffles depends on the airflow patterns in the rack. Experiment with

different arrangements to position the baffles effectively.

Power Supply Considerations

Cisco ASA 5506-X Hardware Installation Guide