Sony R-D-S EON MHC-2900 Manuel d'utilisation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony R-D-S EON MHC-2900. Sony R-D-S EON MHC-2900 35 pages.

Imprimer la page

To stop relay play

Press ll on the playing deck.

If you play both decks at the same time

You hear the sound from deck A.

When listening to a tape recorded with

the Dolby* noise reduction system

Press the DOLBY NR button to select B or

C. DOLBY NR B or C appears in the

display. The setting affects both decks.

Dolby noise reduction system reduces tape

hiss noise in low-level high-frequency

signals.

* Dolby noise reduction manufactured

under license from Dolby Laboratories

Licensing Corporation.

"DOLBY" and the double-D symbol O00

are trademarks of Dolby Laboratories

Licensing Corporation.

To reset the counter

Press the COUNTER A/B button to display

the counter for the deck you want to reset,

and then press RESET.

One Touch Play feature

Press [> or <J on the tape player when

the power is off.

When a tape is in the player, you will

immediately be able to listen to the tape

without pressing any other buttons. If no

tape is inserted, the system will just turn

on.

eee

Recording a CD

You can record from a CD to a tape. Use

TYPE I (normal), TYPE II (CrO,) or TYPE IV

(METAL) tapes.

You cannot listen to other sources while

recording.

Recording a CD

Automatically

By using the CD SYNCHRO button, you

can record from a CD to a tape quickly.

Use the buttons on the unit for this

operation. (See "Glossary".

POWER—ON

Before operation

1 Press [> to select the CD player.

If the player starts playing, press I to

stop play.

2 Press EFFECT on the amplifier so that

"EFFECT OFF" appears in the display.

11 Press & OPEN/CLOSE on the CD

player and place a CD. Then, press

& OPEN/CLOSE again to close the tray.

Total number of tracks and total playing

time appear in the display.

2 Press & and insert a blank tape into

deck B.

Make sure the tabs on the cassette have

not been removed.

3 select dual or single-sided recording

with DIRECTION and press DISPLAY.

To record

Press DIRECTION so that

One side

== appears

Both sides*

C=) or RELAY appears

Recording always stops at the end of the

reverse side. Be sure to start from the

front side.

4 When you want to reduce the hiss noise

in low-level high-frequency signals,

press DOLBY NR to select B or C.

Dolby C provides greater noise

reduction benefit than Dolby B.

5 Press CD SYNCHRO.

"CD SYNC" appears in the display and

the deck B stands by for recording.

6 Press If PAUSE on the tape player to

release recording pause.

Recording starts.

To stop recording

Press lf on deck B or the CD player.

To change the display

Press DISPLAY so that CD player display

and Tape player display change alternately.

if the CD SYNCHRO button does not

operate

It means that you cannot record on this

cassette. (The tabs have been removed.)

Adjusting the volume will not affect

the recording level

But this control will change the sound

levels you hear through the speakers or

headphones.

Recording equalized or processed

sounds

If audio emphasis setting or a Personal File

is selected on the amplifier, the processed

sound can be recorded. When playing back

a recording that was made of a processed

sound, use EFFECT OFF mode. If the

processed sound is recorded and then the

playback is processed again, the resulting

sound may be distorted. To make a flat

(unprocessed) recording, use EFFECT OFF

mode.

What the [> and <1 indicators

indicate

The [> and << indicators light to indicate

which side starts recording.

They also tell you if a tab has been

removed.

if one indicator lights steadily and the

other indicator flashes for a few

seconds, then disappears

It means that recording will start from the

side which indicator lights steadily. If you

want to start recording from the other side,

press the other side button.

If one indicator lights steadily and the

other indicator neither lights nor

flashes

It means that you can record on only the

side which indicator lights steadily. (The

tab on the other side has been removed.)

if one indicator flashes steadily and the

other indicator neither lights nor

flashes

It: means that you can record on only the

side for which indicator flashes steadily.

Switch sides to start recording by pressing

the button of the side which is flashing.

If both indicators neither light nor

flash

It means that you cannot record on this

cassette. (Both tabs have been removed.)

continue to next page >

Chapter 4: the Tape Player