Sony SA-40SE1 Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony SA-40SE1. Sony SA-40SE1 20 pages. All-in-one soundbar
Également pour Sony SA-40SE1 : Garantie limitée (1 pages), Spécifications (2 pages)

Imprimer la page

B DC IN 18V jack

Attach the AC power cord (mains lead) (supplied) to the AC adaptor (supplied). Then plug

the connector of the AC adaptor into the DC IN 18V jack on the rear of the unit.

After you have made all connections, connect the AC power cord (mains lead) into the AC

power outlet. If the supplied adaptor on the plug does not fit your wall outlet, detach it from

the plug (only for models equipped with an adaptor).

Guide the audio cord and the cable attached to the AC adaptor through

the notch at the side of the rear cover, then reattach the rear cover to

the unit and secure it with the screw removed in step 1.

Installing the unit

Installing the unit on a flat surface

Be sure to attach the supplied foot pads to prevent vibration or movement as shown in the

illustration below.

AC adaptor (supplied)

Audio cord

AC power cord

(mains lead)

(supplied)

Cable attached to the

AC adaptor

To the AC

power outlet

Bottom of the unit

continued