Cisco ASR 5000 Manuel d'installation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco ASR 5000. Cisco ASR 5000 37 pages. Applying power and verifying the installation
Également pour Cisco ASR 5000 : Manuel d'installation (18 pages), Manuel d'installation (33 pages), Procédure d'installation (8 pages)

Imprimer la page

Checking the LEDs on the SPIO(s)

Each SPIO is equipped with status LEDs:

• Run/Fail

• Active

• Standby

In addition to the status LEDs, each the RJ-45 and SFP interfaces to the management network are equipped

with the following LEDs:

• Link

• Activity

The following figure shows the LEDs on the SPIO.

The possible states for all of the SPIO's LEDs are described in the sections that follow.

Figure 4: SPIO LEDs

SPIO Run/Fail LED States

The SPIO's Run/ Fail LED indicates the overall status of the card. This LED is illuminated steady green for

normal operation.

If the LED is not green, use the troubleshooting information in the table to diagnose the problem.

ASR 5000 Installation Guide

Applying Power and Verifying the Installation