Cisco ASR 5000 Panduan Instalasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perangkat Keras Jaringan Cisco ASR 5000. Cisco ASR 5000 37 halaman. Applying power and verifying the installation
Juga untuk Cisco ASR 5000: Panduan Instalasi (18 halaman), Panduan Instalasi (33 halaman), Prosedur Instalasi (8 halaman)

Halaman Cetak
Cisco ASR 5000 Panduan Instalasi

Checking the LEDs on the SPIO(s)

Checking the LEDs on the SPIO(s)
Each SPIO is equipped with status LEDs:
• Run/Fail
• Active
• Standby
In addition to the status LEDs, each the RJ-45 and SFP interfaces to the management network are equipped
with the following LEDs:
• Link
• Activity
The following figure shows the LEDs on the SPIO.
The possible states for all of the SPIO's LEDs are described in the sections that follow.
Figure 4: SPIO LEDs

SPIO Run/Fail LED States

The SPIO's Run/ Fail LED indicates the overall status of the card. This LED is illuminated steady green for
normal operation.
If the LED is not green, use the troubleshooting information in the table to diagnose the problem.
ASR 5000 Installation Guide
16
Applying Power and Verifying the Installation