Cisco C1101-4P Installation et raccordement - Page 26
Parcourez en ligne ou téléchargez le pdf Installation et raccordement pour {nom_de_la_catégorie} Cisco C1101-4P. Cisco C1101-4P 27 pages. Install and upgrade internal modules and field replaceable units
Également pour Cisco C1101-4P : Manuel (12 pages)
Imprimer la page
Connection Procedures and Precautions
1
Connection Procedures and Precautions
After you have installed the router chassis, perform these steps to connect the WAN and LAN interfaces:
• Connect each WAN and LAN to the appropriate connector on the chassis.
• Position the cables carefully so that you do not strain the connectors.
• Organize cables in bundles so that cables do not intertwine.
• Inspect the cables to make sure that the routing and bend radius is satisfactory. If necessary, reposition
• Install cable ties in accordance with site requirements.
Configure the Router at Startup
After installing the router and connecting the cables, you can configure the router with basic configurations.
For more information on how to configure the router, see the
Install and Connect the Router
26
Cable color codes are specific to Cisco cables.
the cables.
Install and Connect the Router
Cisco 1100 Series Software Configuration
Guide.