Cisco C9300-48S Manuel d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco C9300-48S. Cisco C9300-48S 16 pages.
Imprimer la page
1
Blue Beacon LED
2
Reset (Mode) button
System LED
3
4
Active LED
5
StackPower LED
LED Indicators in the Meraki-managed mode
System status
1
Switch is powered off or not receiving power.
2
Switch if powered on and is loading the bootstrap firmware.
3
Switch is loading the operating system.
System error: Switch failed to load operating system or
4
bootstrap firmware.
Setting up local management and cloud-connectivity
requirements.
5
Note: If the switch has not been assigned a static
management IP previously, it will try to obtain an IP via DHCP
in this stage.
Reports systems status (along with the System LED)
Please refer to the LED indicators in the Meraki-managed mode table for details
Reset switch to factory settings.
Please refer to the Factory Reset Process section for details
Reports status of the (along with the Blue Beacon LED)
Identifies the switch's role in the stack
Indicates StackPower operation states.
Blue Beacon
System LED
LED
Off
Solid amber
Off
Blinking green
Blinking amber
Cycling b/w green &
Flashing Blue
amber (OR blinking
green)
6