Cisco Firepower 2110 Manuel du logiciel - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel du logiciel pour {nom_de_la_catégorie} Cisco Firepower 2110. Cisco Firepower 2110 37 pages. Rack-mount and ground the chassis
Également pour Cisco Firepower 2110 : Manuel (12 pages), Manuel de déploiement (8 pages), Pour commencer (42 pages)

Imprimer la page

Reimage from Firepower Threat Defense to ASA

a) Install the system software install package:

system install [noconfirm] url

Include the noconfirm option if you do not want to respond to confirmation messages. Use an HTTP,

HTTPS, or FTP URL; if a username and password are required, you will be prompted to supply them.

This file is large and can take a long time to download, depending on your network.

When installation is complete, the system reboots. The time required for application component installation

and for the ASA FirePOWER services to start differs substantially: high-end platforms can take 10 or

more minutes, but low-end platforms can take 60-80 minutes or longer. (The show module sfr output

should show all processes as Up.)

Example:

asasfr-boot> system install

http://admin:[email protected]/packages/asasfr-sys-6.0.1-58.pkg

Verifying

Downloading

Extracting

Package Detail

Do you want to continue with upgrade? [y]: y

Warning: Please do not interrupt the process or turn off the system.

Doing so might leave system in unusable state.

Upgrading

Starting upgrade process ...

Populating new system image

Reboot is required to complete the upgrade. Press 'Enter' to reboot the system. [type

Enter]

Broadcast message from root (ttyS1) (Mon Feb 17 19:28:38 2016):

The system is going down for reboot NOW!

Console session with module sfr terminated.

a) If you need to install a patch release, you can do so later from your manager: ASDM or the Firepower

Management Center.

Step 11

Obtain a Strong Encryption license and other licenses for an existing ASA for which you did not save the

activation key: see http://www.cisco.com/go/license. In the Manage > Licenses section you can re-download

your licenses.

To use ASDM (and many other features), you need to install the Strong Encryption (3DES/AES) license. If

you saved your license activation key from this ASA before you previously reimaged to the Firepower Threat

Defense device, you can re-install the activation key. If you did not save the activation key but own licenses

for this ASA, you can re-download the license. For a new ASA, you will need to request new ASA licenses.

Step 12

Obtain licenses for a new ASA.

a) Obtain the serial number for your ASA by entering the following command:

show version | grep Serial

This serial number is different from the chassis serial number printed on the outside of your hardware.

The chassis serial number is used for technical support, but not for licensing.

Cisco ASA and Firepower Threat Defense Reimage Guide

Description:

Requires reboot:

Cisco ASA and Firepower Threat Defense Reimage Guide

Cisco ASA-FirePOWER 6.0.1-58 System Install

Yes