Cisco Firepower 2110 Manuel du logiciel - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel du logiciel pour {nom_de_la_catégorie} Cisco Firepower 2110. Cisco Firepower 2110 37 pages. Rack-mount and ground the chassis
Également pour Cisco Firepower 2110 : Manuel (12 pages), Manuel de déploiement (8 pages), Pour commencer (42 pages)

Imprimer la page

Reimage from Firepower Threat Defense to ASA

write memory

Step 9

Install the ASA and ASDM images.

Booting the ASA from ROMMON mode does not preserve the system image across reloads; you must still

download the image to flash memory. You also need to download ASDM to flash memory.

a) Download the ASA and ASDM images (see

the ASA. The ASA supports many server types. See the copy command for more information:

http://www.cisco.com/c/en/us/td/docs/security/asa/asa-command-reference/A-H/cmdref1/c4.html#pgfId-2171368.

b) Copy the ASA image to the ASA flash memory. This step shows an FTP copy.

copy ftp://user:password@server_ip/asa_file disk0:asa_file

Example:

ciscoasa# copy ftp://admin:[email protected]/asa961-smp-k8.bin disk0:asa961-smp-k8.bin

c) Copy the ASDM image to the ASA flash memory. This step shows an FTP copy.

copy ftp://user:password@server_ip/asdm_file disk0:asdm_file

Example:

ciscoasa# copy ftp://admin:[email protected]/asdm-761.bin disk0:asdm-761.bin

d) Reload the ASA:

reload

The ASA reloads using the image in disk0.

Step 10

(Optional) Install the ASA FirePOWER module software.

You need to install the ASA FirePOWER boot image, partition the SSD, and install the system software

according to this procedure.

a) Copy the boot image to the ASA. Do not transfer the system software; it is downloaded later to the SSD.

This step shows an FTP copy.

copy ftp://user:password@server_ip/firepower_boot_file disk0:firepower_boot_file

Example:

ciscoasa# copy ftp://admin:[email protected]/asasfr-5500x-boot-6.0.1.img

disk0:/asasfr-5500x-boot-6.0.1.img

b) Download the ASA FirePOWER services system software install package from Cisco.com to an HTTP,

HTTPS, or FTP server accessible from the Management interface. Do not download it to disk0 on the

ASA.

c) Set the ASA FirePOWER module boot image location in ASA disk0:

sw-module module sfr recover configure image disk0:file_path

Example:

ciscoasa# sw-module module sfr recover configure image disk0:asasfr-5500x-boot-6.0.1.img

Cisco ASA and Firepower Threat Defense Reimage Guide

Download Software, on page

2) to a server accessible by