Argon 18 GALLIUM PRO Manuel d'assemblage - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} Argon 18 GALLIUM PRO. Argon 18 GALLIUM PRO 20 pages.
Imprimer la page
- 1. Table of Contents
- 2. Assembly Overview
- 3. Assembly Overview
- 4. Frame Inspection
- 5. Headset Installation
- 5. Cables & Housing Installation
- 5. Cables & Housing Installation
- 6. Electronic Drive-Train Specification
- 6. Electronic Drive-Train Specification
- 6. Saddle Adjustment
- 7. Saddle Adjustment
- 8. Derailleur Hanger Adjustment
GALLIUM PRO: 5. Saddle adjustment
5.1 Install the saddle on the rocker (3e)
3c
and tighten the rail clamp (3f) using the
3b
screw (3d).
5.2 Adjust the angle of the saddle using
a 8mm open wrench on the 3c bolt.
Then tighten the assembly with the rear
bolt (3d) to 6Nm.
GREASE
5.3 The rail clamp (3f) can be flipped to
change the saddle offset.
3f
3e
GREASE
GREASE
3b
3d
3
6Nm
14