Argon 18 GALLIUM PRO 조립 설명서 - 페이지 15
{카테고리_이름} Argon 18 GALLIUM PRO에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argon 18 GALLIUM PRO 20 페이지.
페이지 인쇄
- 1. Table of Contents
- 2. Assembly Overview
- 3. Assembly Overview
- 4. Frame Inspection
- 5. Headset Installation
- 5. Cables & Housing Installation
- 5. Cables & Housing Installation
- 6. Electronic Drive-Train Specification
- 6. Electronic Drive-Train Specification
- 6. Saddle Adjustment
- 7. Saddle Adjustment
- 8. Derailleur Hanger Adjustment
GALLIUM PRO: 5. Saddle adjustment
5.1 Install the saddle on the rocker (3e)
3c
and tighten the rail clamp (3f) using the
3b
screw (3d).
5.2 Adjust the angle of the saddle using
a 8mm open wrench on the 3c bolt.
Then tighten the assembly with the rear
bolt (3d) to 6Nm.
GREASE
5.3 The rail clamp (3f) can be flipped to
change the saddle offset.
3f
3e
GREASE
GREASE
3b
3d
3
6Nm
14