Cisco Firepower 4150 Manuel - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco Firepower 4150. Cisco Firepower 4150 42 pages. Rack-mount and ground the chassis
Également pour Cisco Firepower 4150 : Manuel de maintenance et de mise à jour (20 pages), Manuel (36 pages), Manuel (26 pages), Manuel (8 pages), Pour commencer (42 pages)

Imprimer la page
Cisco Firepower 4150 Manuel
1-Gb Network Module with Hardware Bypass
1-Gb Network Module with Hardware Bypass
The following figure shows the front panel view of the 1-Gb network module with hardware bypass
(FPR-NM-8X1G-F). Pair ports 1 and 2, 3 and 4, 5 and 6, and 7 and 8 to form hardware bypass paired sets.
Note
Figure 12: FPR-NM-8X1G-F
1
3
5
Overview
18
Make sure you have the correct firmware package and software version installed to support this network
module. For instructions on how to verify your firmware package version and to upgrade the firmware if
necessary, see the
Cisco Firepower 4100/9300 FXOS Firmware Upgrade
FXOS Compatibility
for the software compatibility matrix.
Captive screw/handle
Ethernet X/1
Ports 1 and 2 are paired together to form a
hardware bypass pair. LED B1 applies to this
paired port.
Ethernet X/2
Ports 5 and 6 are paired together to form a
hardware bypass pair. LED B3 applies to this
paired port.
Guide. See
2
Bypass LEDs B1 through B4
• Green—In standby mode.
• Amber, flashing—Port is in hardware bypass
mode, failure event.
4
Ethernet X/2
Ports 3 and 4 are paired together to form a
hardware bypass pair. LED B2 applies to this
paired port.
6
Ethernet X/2
Ports 7 and 8 are paired together to form a
hardware bypass pair. LED B4 applies to this
paired port.
Overview
Cisco Firepower 4100/9300