- ページ 18

ネットワーク・ハードウェア Cisco Firepower 4150のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Firepower 4150 42 ページ。 Rack-mount and ground the chassis
Cisco Firepower 4150 にも：メンテナンスとアップグレードマニュアル (20 ページ), マニュアル (36 ページ), マニュアル (26 ページ), マニュアル (8 ページ), はじめに (42 ページ)

1-Gb Network Module with Hardware Bypass

The following figure shows the front panel view of the 1-Gb network module with hardware bypass

(FPR-NM-8X1G-F). Pair ports 1 and 2, 3 and 4, 5 and 6, and 7 and 8 to form hardware bypass paired sets.

Note

Figure 12: FPR-NM-8X1G-F

Overview

Make sure you have the correct firmware package and software version installed to support this network

module. For instructions on how to verify your firmware package version and to upgrade the firmware if

necessary, see the

Cisco Firepower 4100/9300 FXOS Firmware Upgrade

FXOS Compatibility

for the software compatibility matrix.

Captive screw/handle

Ethernet X/1

Ports 1 and 2 are paired together to form a

hardware bypass pair. LED B1 applies to this

paired port.

Ethernet X/2

Ports 5 and 6 are paired together to form a

hardware bypass pair. LED B3 applies to this

paired port.

Guide. See

Bypass LEDs B1 through B4

• Green—In standby mode.

• Amber, flashing—Port is in hardware bypass

mode, failure event.

Ethernet X/2

Ports 3 and 4 are paired together to form a

hardware bypass pair. LED B2 applies to this

paired port.

Ethernet X/2

Ports 7 and 8 are paired together to form a

hardware bypass pair. LED B4 applies to this

paired port.

Overview

Cisco Firepower 4100/9300