Cisco Firepower 9300 Installation & Maintenance - Page 15

Parcourez en ligne ou téléchargez le pdf Installation & Maintenance pour {nom_de_la_catégorie} Cisco Firepower 9300. Cisco Firepower 9300 36 pages. Installation, maintenance, and upgrade guide
Également pour Cisco Firepower 9300 : Pour commencer (42 pages)

Imprimer la page
Installation, Maintenance, and Upgrade
Warning
Warning
Warning
Warning
Step 1
To install a new network module for the first time into an empty slot, do the following:
a) Power down the chassis by moving the power switch to the OFF position.
b) Follow Steps 4 through 6 to install the new network module.
c) Power on the chassis by moving the power switch to the ON position.
The state for the new network module is
d) To change the status of the network module to
Chassis" topic in the System Administration chapter in the
Step 2
To remove and replace an existing network module, do one of the following:
a) Save your configuration.
b) Power down the chassis by moving the power switch to the OFF position.
c) Continue with Step 3.
Step 3
Do one of the following:
a) If you are removing single-wide network modules installed in the two network module slots, loosen the captive screw
on the left of the network modules, release the handles, and then gently pull the network modules out of the chassis.
Remove the divider between the two network modules by loosening the captive screw at the top of the divider and
then pull it out.
Statement 1073 No User-Serviceable Parts
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Statement 1089 Instructed and Skilled Person Definitions
An instructed person is someone who has been instructed and trained by a skilled person and takes
the necessary precautions when working with equipment.
A skilled person or qualified personnel is someone who has training or experience in the equipment
technology and understands potential hazards when working with equipment.
Statement 1090 Installation by Skilled Person
Only a skilled person should be allowed to install, replace, or service this equipment. See statement
1089 for the definition of a skilled person.
Statement 1091 Installation by an Instructed Person
Only an instructed person or skilled person should be allowed to install, replace, or service this
equipment. See statement 1089 for the definition of an instructed or skilled person.
Install, Remove, and Replace the Double-Wide Network Module
.
OIR Failed
, reboot the chassis. See the "Rebooting the Firepower 4100/9300
Online
FXOS Configuration Guide
Installation, Maintenance, and Upgrade
for your software version.
15