Cisco Firepower 9300 Installation & Wartung - Seite 15

Blättern Sie online oder laden Sie pdf Installation & Wartung für Netzwerk-Hardware Cisco Firepower 9300 herunter. Cisco Firepower 9300 36 Seiten. Installation, maintenance, and upgrade guide
Auch für Cisco Firepower 9300: Erste Schritte (42 seiten)

Seite drucken

Installation, Maintenance, and Upgrade

Warning

Step 1

To install a new network module for the first time into an empty slot, do the following:

a) Power down the chassis by moving the power switch to the OFF position.

b) Follow Steps 4 through 6 to install the new network module.

c) Power on the chassis by moving the power switch to the ON position.

The state for the new network module is

d) To change the status of the network module to

Chassis" topic in the System Administration chapter in the

Step 2

To remove and replace an existing network module, do one of the following:

a) Save your configuration.

b) Power down the chassis by moving the power switch to the OFF position.

c) Continue with Step 3.

Step 3

Do one of the following:

a) If you are removing single-wide network modules installed in the two network module slots, loosen the captive screw

on the left of the network modules, release the handles, and then gently pull the network modules out of the chassis.

Remove the divider between the two network modules by loosening the captive screw at the top of the divider and

then pull it out.

Statement 1073 No User-Serviceable Parts

There are no serviceable parts inside. To avoid risk of electric shock, do not open.

Statement 1089 Instructed and Skilled Person Definitions

An instructed person is someone who has been instructed and trained by a skilled person and takes

the necessary precautions when working with equipment.

A skilled person or qualified personnel is someone who has training or experience in the equipment

technology and understands potential hazards when working with equipment.

Statement 1090 Installation by Skilled Person

Only a skilled person should be allowed to install, replace, or service this equipment. See statement

1089 for the definition of a skilled person.

Statement 1091 Installation by an Instructed Person

Only an instructed person or skilled person should be allowed to install, replace, or service this

equipment. See statement 1089 for the definition of an instructed or skilled person.

Install, Remove, and Replace the Double-Wide Network Module

OIR Failed

, reboot the chassis. See the "Rebooting the Firepower 4100/9300

Online

FXOS Configuration Guide

Installation, Maintenance, and Upgrade

for your software version.