Cisco Firepower 9300 Installation & Wartung - Seite 17

Blättern Sie online oder laden Sie pdf Installation & Wartung für Netzwerk-Hardware Cisco Firepower 9300 herunter. Cisco Firepower 9300 36 Seiten. Installation, maintenance, and upgrade guide
Auch für Cisco Firepower 9300: Erste Schritte (42 seiten)

Seite drucken

Installation, Maintenance, and Upgrade

Figure 8: Install the 100-Gb Network Module

Step 5

Gently push on the handle until it is fully seated on the network module faceplate and the module is fully seated in the

chassis.

Step 6

Tighten the captive screw on the left of the network module.

Step 7

Power on the chassis so that the new network module is recognized.

Follow the procedures in the

been discovered correctly by the Firepower 9300.

Remove and Replace the Power Supply Module

You can remove and replace the power supply module while the system is running. Make sure that at least

one of the power supply modules is active while hot-swapping.

Note

FXOS Configuration Guide

Replace power supplies immediately. Power supply blanks are not available.

Remove and Replace the Power Supply Module

to connect to the network module and make sure that it has

Installation, Maintenance, and Upgrade