Cisco Gigabit Switch Router Cisco 12012 Manuel d'instructions de remplacement
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de remplacement pour {nom_de_la_catégorie} Cisco Gigabit Switch Router Cisco 12012. Cisco Gigabit Switch Router Cisco 12012 20 pages. Gigabit switch router cablemanagement
kit
Également pour Cisco Gigabit Switch Router Cisco 12012 : Manuel d'instructions de remplacement (34 pages), Manuel d'instructions de remplacement (6 pages), Fiche technique (9 pages), Manuel d'instructions d'installation (14 pages)
Doc. No.
78-4330-02
Cisco 12012 Gigabit Switch Router DC-Input
Power Supply Replacement Instructions
Product Number: PWR-GSR12-DC=
Document Order Number: DOC-784330=
This document contains instructions for installing or replacing a DC-input power supply in the
Cisco 12012 Gigabit Switch Router (GSR).
The sections of this document include the following:
•
Product Overview, page 1
•
Safety Guidelines, page 5
•
Tools and Parts Required, page 8
•
•
Checking the Installation, page 17
•
FCC Class A Compliance, page 18
•
Cisco Connection Online, page 19
Product Overview
The Cisco 12012 has two card cages; the upper card cage and the lower card cage. (Refer to
Figure 1.) The upper card cage has 12 user-configurable slots available for line cards and a route
processor (RP). One additional slot (rightmost slot) in the upper card cage is non-configurable; it is
reserved for an alarm card. The line cards and the RP are not slot dependent; you can install the line
cards and the RP in any of the first 12 available slots.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1997-2002
Cisco Systems, Inc.
All rights reserved.
1