Cisco Gigabit Switch Router Cisco 12012 교체 지침 매뉴얼
{카테고리_이름} Cisco Gigabit Switch Router Cisco 12012에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Gigabit Switch Router Cisco 12012 20 페이지. Gigabit switch router cablemanagement
kit
Cisco Gigabit Switch Router Cisco 12012에 대해서도 마찬가지입니다: 교체 지침 매뉴얼 (34 페이지), 교체 지침 매뉴얼 (6 페이지), 데이터시트 (9 페이지), 설치 지침 매뉴얼 (14 페이지)
페이지 인쇄
Doc. No.
78-4330-02
Cisco 12012 Gigabit Switch Router DC-Input
Power Supply Replacement Instructions
Product Number: PWR-GSR12-DC=
Document Order Number: DOC-784330=
This document contains instructions for installing or replacing a DC-input power supply in the
Cisco 12012 Gigabit Switch Router (GSR).
The sections of this document include the following:
•
Product Overview, page 1
•
Safety Guidelines, page 5
•
Tools and Parts Required, page 8
•
•
Checking the Installation, page 17
•
FCC Class A Compliance, page 18
•
Cisco Connection Online, page 19
Product Overview
The Cisco 12012 has two card cages; the upper card cage and the lower card cage. (Refer to
Figure 1.) The upper card cage has 12 user-configurable slots available for line cards and a route
processor (RP). One additional slot (rightmost slot) in the upper card cage is non-configurable; it is
reserved for an alarm card. The line cards and the RP are not slot dependent; you can install the line
cards and the RP in any of the first 12 available slots.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1997-2002
Cisco Systems, Inc.
All rights reserved.
1