Digitrax SDH164K1C Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digitrax SDH164K1C. Digitrax SDH164K1C 12 pages. Plug ‘n play for kato f40ph ho

Imprimer la page

SoundLoader and the sound projects from the Digitrax web site and review the

descriptions on your compatible PC.

My speaker does not have a polarity mark.

Speaker Polarity is simply used to ensure when more than one speaker is being

used that they can be wired or "phased" so the input causes the diaphragm to

move in the same direction. It can be ignored in a single speaker case.

When using my LT1 and test kit when I blow the Horn the decoder resets .

Using the LT1 test kit and protection resistor is good to check the decoder is

safely connected, but when a loud sound like a horn is activated the protection

resistor limits the available track input power too much, so the decoder resets.

Simply test full volume sounds on normal track power after connections check

OK.

When I blow the Horn while on normal powered track the decoder slows

down or resets .

1. If high volume overloads the decoder and the loco slows down, set CV57=0

to turn off BEMF.

2. Alternatively if you are using a speaker with too low an impedance, try a

new speaker with the factory recommended 32 ohm impedance. It is safe to

use a 4 or 8ohm speaker, as long as the volume is not set too high which may

overload beyond the designed power level.

Warranty & Repair

Digitrax gives a one year "No Worries" Warranty against manufacturing

defects and accidental customer damage on all Digitrax products.

That's it! A simple, straightforward warranty with no tricky language!

Visit www.digitrax.com for complete warranty details and instructions for

returning items for repair.

2443 Transmitter RD

Panama City, FL 32404

www.digitrax.com

Digitrax, Inc. is not responsible for unintentional

errors or omissions in this document.

www.digitrax.com

850-872-9890

850-872-9557