Digitrax SDH164K1C Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Контроллер Digitrax SDH164K1C. Digitrax SDH164K1C 12 страниц. Plug ‘n play for kato f40ph ho
Печатать страницуSoundLoader and the sound projects from the Digitrax web site and review the
descriptions on your compatible PC.
My speaker does not have a polarity mark.
Speaker Polarity is simply used to ensure when more than one speaker is being
used that they can be wired or "phased" so the input causes the diaphragm to
move in the same direction. It can be ignored in a single speaker case.
When using my LT1 and test kit when I blow the Horn the decoder resets .
Using the LT1 test kit and protection resistor is good to check the decoder is
safely connected, but when a loud sound like a horn is activated the protection
resistor limits the available track input power too much, so the decoder resets.
Simply test full volume sounds on normal track power after connections check
OK.
When I blow the Horn while on normal powered track the decoder slows
down or resets .
1. If high volume overloads the decoder and the loco slows down, set CV57=0
to turn off BEMF.
2. Alternatively if you are using a speaker with too low an impedance, try a
new speaker with the factory recommended 32 ohm impedance. It is safe to
use a 4 or 8ohm speaker, as long as the volume is not set too high which may
overload beyond the designed power level.
Warranty & Repair
Digitrax gives a one year "No Worries" Warranty against manufacturing
defects and accidental customer damage on all Digitrax products.
That's it! A simple, straightforward warranty with no tricky language!
Visit www.digitrax.com for complete warranty details and instructions for
returning items for repair.
©2010 Digitrax, Inc.
2443 Transmitter RD
Panama City, FL 32404
www.digitrax.com
Digitrax, Inc. is not responsible for unintentional
errors or omissions in this document.
www.digitrax.com
850-872-9890
T
850-872-9557
F
11