Digitrax PX108-2 Power Xtender Manuel d'instructions d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Digitrax PX108-2 Power Xtender. Digitrax PX108-2 Power Xtender 2 pages. Use with digitrax series 6 1 amp decoders

Imprimer la page

PX108-2 Power Xtender

Use with Digitrax Series 6 1 Amp Decoders

Equipped with 2 pin PX socket or solder pad

connections

1.007" x 0.492" x 0.299" (25.6mm x 12.5mm x 7.6mm)

Features:

▪

Keeps locos running during intermittent power interruptions resulting from

dirty or bad track.

▪

Hold up time varies based on actual decoder load & track conditions.

▪

For use with Digitrax 1 Amp Series 6 decoders.

▪

Easy to add to Digitrax decoders with 2 pin PX socket.

▪

Easy to add to Digitrax decoders with PX solder pad connections.

▪

Plug N' Play installation with no CV configuration required.

Parts List:

1 PX108-2 Harness

1 PX108 Power Xtender

Installation Instructions:

The PX108-2 keeps locomotives running in situations where power to the loco-

motive is interrupted due to dirty, dead or bad track. The 2 pin harness makes

installation easy on 2 pin PX socket. In the absence of a 2 pin PX socket the use

of solder pads may be required for installation.

Simply follow these instructions:

To install simply plug one end of the 2 pin PX108-2 harness into the 2 pin

PX socket on your decoder. For decoders that require a soldered connection

for the PX108-2 please follow the instructions included with your decoder.

Plug the other end of the 2 pin PX108-2 harness into its socket on the PX112

Power Xtender. The plugs are keyed to fit easily into their sockets in only one

orientation.

Route wires and secure the PX108 Power Extender unit as needed.

Verify that all the connections are secure prior to operating the locomotive.

Use on 10-18V track power only.

Digitrax manuals and instructions are updated periodically. Please

visit www.digitrax.com for the latest version.

Complete Train Control

Run Your Trains, Not Your Track!

— 1 —

HO Scale

0.33 F Capacitance

Use on 10-18V Track Power

1 Instruction Sheet