Digitrax PX108-2 Power Xtender Руководство по установке
Просмотреть онлайн или скачать pdf Руководство по установке для Удлинитель Digitrax PX108-2 Power Xtender. Digitrax PX108-2 Power Xtender 2 страницы. Use with digitrax series 6 1 amp decoders
Печатать страницуPX108-2 Power Xtender
Use with Digitrax Series 6 1 Amp Decoders
Equipped with 2 pin PX socket or solder pad
connections
1.007" x 0.492" x 0.299" (25.6mm x 12.5mm x 7.6mm)
Features:
▪
Keeps locos running during intermittent power interruptions resulting from
dirty or bad track.
▪
Hold up time varies based on actual decoder load & track conditions.
▪
For use with Digitrax 1 Amp Series 6 decoders.
▪
Easy to add to Digitrax decoders with 2 pin PX socket.
▪
Easy to add to Digitrax decoders with PX solder pad connections.
▪
Plug N' Play installation with no CV configuration required.
Parts List:
1 PX108-2 Harness
1 PX108 Power Xtender
Installation Instructions:
The PX108-2 keeps locomotives running in situations where power to the loco-
motive is interrupted due to dirty, dead or bad track. The 2 pin harness makes
installation easy on 2 pin PX socket. In the absence of a 2 pin PX socket the use
of solder pads may be required for installation.
Simply follow these instructions:
1.
To install simply plug one end of the 2 pin PX108-2 harness into the 2 pin
PX socket on your decoder. For decoders that require a soldered connection
for the PX108-2 please follow the instructions included with your decoder.
2.
Plug the other end of the 2 pin PX108-2 harness into its socket on the PX112
Power Xtender. The plugs are keyed to fit easily into their sockets in only one
orientation.
3.
Route wires and secure the PX108 Power Extender unit as needed.
4.
Verify that all the connections are secure prior to operating the locomotive.
5.
Use on 10-18V track power only.
Digitrax manuals and instructions are updated periodically. Please
visit www.digitrax.com for the latest version.
© 2017 Digitrax, Inc.
Complete Train Control
Run Your Trains, Not Your Track!
— 1 —
HO Scale
0.33 F Capacitance
Use on 10-18V Track Power
1 Instruction Sheet
www.digitrax.com