Cisco UCS B200 M3 Note d'installation et d'entretien - Page 31

Parcourez en ligne ou téléchargez le pdf Note d'installation et d'entretien pour {nom_de_la_catégorie} Cisco UCS B200 M3. Cisco UCS B200 M3 36 pages. Blade server
Également pour Cisco UCS B200 M3 : Manuel d'installation (34 pages), Note d'installation et d'entretien (37 pages), Manuel (8 pages), Manuel de mise à jour (21 pages), Note d'installation et d'entretien (28 pages)

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Installing a Modular LOM

The modular LOM is a specialized I/O adapter providing 2 x 10 Gigabit of Ethernet/FCoE connectivity

to each chassis IOM. The following option is available:

Table 6

Cisco Product ID

UCSB-MLOM-40G-01

You must remove the adapter card to service the modular LOM.

Note

To install a modular LOM card on the blade server, follow these steps:

Position the modular LOM's board connector above the motherboard connector and align the captive

Step 1

screw to the standoff post on the motherboard.

Firmly press the modular LOM's board connector into the motherboard connector.

Step 2

Tighten the captive screw.

Step 3

Removing a modular LOM is the reverse of installing it. You may find it helpful when removing the

Tip

connector from the motherboard to gently rock the board along the length of the connector until it

loosens.

OL-26624-01

Modular LOM Options

Name

Cisco VIC 1240 - 40 Gb mLOM for UCS M3 Blade Servers. Plugs

into the dedicated mLOM connector only. It is the only card that can

be plugged into the mLOM connector.

Cisco UCS B200 M3 Blade Server Installation and Service Note

Memory and Performance