Cisco UCS B200 M3 설치 및 서비스 참고 사항 - 페이지 31

{카테고리_이름} Cisco UCS B200 M3에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B200 M3 36 페이지. Blade server
Cisco UCS B200 M3에 대해서도 마찬가지입니다: 설치 매뉴얼 (34 페이지), 설치 및 서비스 참고 사항 (37 페이지), 매뉴얼 (8 페이지), 업그레이드 매뉴얼 (21 페이지), 설치 및 서비스 참고 사항 (28 페이지)

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Installing a Modular LOM

The modular LOM is a specialized I/O adapter providing 2 x 10 Gigabit of Ethernet/FCoE connectivity

to each chassis IOM. The following option is available:

Table 6

Cisco Product ID

UCSB-MLOM-40G-01

You must remove the adapter card to service the modular LOM.

Note

To install a modular LOM card on the blade server, follow these steps:

Position the modular LOM's board connector above the motherboard connector and align the captive

Step 1

screw to the standoff post on the motherboard.

Firmly press the modular LOM's board connector into the motherboard connector.

Step 2

Tighten the captive screw.

Step 3

Removing a modular LOM is the reverse of installing it. You may find it helpful when removing the

Tip

connector from the motherboard to gently rock the board along the length of the connector until it

loosens.

OL-26624-01

Modular LOM Options

Name

Cisco VIC 1240 - 40 Gb mLOM for UCS M3 Blade Servers. Plugs

into the dedicated mLOM connector only. It is the only card that can

be plugged into the mLOM connector.

Cisco UCS B200 M3 Blade Server Installation and Service Note

Memory and Performance