Cisco 2500 Series Manuel de démarrage - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco 2500 Series. Cisco 2500 Series 47 pages. Wireless controller
Également pour Cisco 2500 Series : Manuel d'installation (12 pages), Manuel de configuration (19 pages), Manuel de déploiement (23 pages), Manuel de configuration (50 pages)

Installing the Controller

Figure 8

After the controller is mounted ion the wall, perform the following tasks to complete the installation:

Step 5

•

Step 6

For configuration instructions about using the CLI setup program, see the

and Power-On Self Test" section on page

Mounting the Controller in a Rack

To mount the 2504 controller in a 19-inch equipment rack, you can order an optional Optional Rack

Mount kit (AIR-CT2504-RMNT).

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions

to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the

top with the heaviest component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting

or servicing the unit in the rack. Statement 1006

Cisco 2500 Series Wireless Controller Getting Started Guide

Place the Controller on the Mounting Screws

Front panel (facing down)

Connecting the Controller Console Port

Securing the Power Adapter Cable

Connecting to the Network

Mounting screws

20.

"Running the Bootup Script