Cisco 2500 Series 시작하기 매뉴얼 - 페이지 16

{카테고리_이름} Cisco 2500 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2500 Series 47 페이지. Wireless controller
Cisco 2500 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 구성 매뉴얼 (19 페이지), 배포 매뉴얼 (23 페이지), 구성 매뉴얼 (50 페이지)

페이지 인쇄

Installing the Controller

Figure 8

After the controller is mounted ion the wall, perform the following tasks to complete the installation:

Step 5

•

Step 6

For configuration instructions about using the CLI setup program, see the

and Power-On Self Test" section on page

Mounting the Controller in a Rack

To mount the 2504 controller in a 19-inch equipment rack, you can order an optional Optional Rack

Mount kit (AIR-CT2504-RMNT).

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions

to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the

top with the heaviest component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting

or servicing the unit in the rack. Statement 1006

Cisco 2500 Series Wireless Controller Getting Started Guide

Place the Controller on the Mounting Screws

Front panel (facing down)

Connecting the Controller Console Port

Securing the Power Adapter Cable

Connecting to the Network

Mounting screws

20.

"Running the Bootup Script