Cisco 7513 Series Manuel de démarrage rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 7513 Series. Cisco 7513 Series 44 pages. Chassis replacement
Également pour Cisco 7513 Series : Manuel d'instructions de remplacement (26 pages), Fiche technique (11 pages), Manuel (30 pages), Maintien (20 pages), Manuel d'instructions de remplacement (19 pages), Manuel d'instructions de remplacement (22 pages)

Install the Hardware

Install the Router on a Bench or Tabletop

Note

To rack-mount the router, refer to the

"Rack-Mount the Router (Recommended)" section

on page 4.

Caution

Two people are required to

perform this step. Avoid sudden twists or

moves to prevent injury.

Step 1

With a person positioned at either side of

the chassis, grasp the bottom edge of the

chassis with one hand near the front and

the other near the back. Slowly lift the

chassis in unison. Place the chassis on a

bench or tabletop where the air intake

vent on the front of the chassis is not

drawing in exhaust air from other

equipment.

POWER

Warning

lift by grasping the handle of the blower

module, nor should you grasp the air intake

grill.

Step 2

Ensure that you have at least 2 or 3 feet

(0.6 to .09 m) of clearance around the rear

of the chassis to install power supplies and

perform maintenance on the chassis.

Step 3

Proceed to the "Install Interface

Processors, Fillers, VIPs, or RSPs" section

on page 9.

When lifting the router, do not