Epson ActionLaser 1500 Manuel de configuration - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Epson ActionLaser 1500. Epson ActionLaser 1500 18 pages. Imaging cartridge replacement procedure
Également pour Epson ActionLaser 1500 : Papier et livraison de papier (11 pages), Manuel d'installation (7 pages), Bulletin d'information sur les produits (8 pages), Spécification du produit (1 pages)
Imprimer la page
4
Attaching the power cord
1. Make sure the power switch at the top right of the printer is
turned off.
2. Insert the power cord into the back of the printer. Then plug
the other end into a properly grounded outlet.
Test printing
1.
Make sure the imaging cartridge is installed. Turn on the
printer. Several messages appear as the printer performs
internal tests. After about 35 seconds, the
appears.
Press the LEVEL 2 button to enter SelecType Level 2.
2.
Press
3.
4.
Press ) twice holding down the button until the display
begins to flash to print the feature print.
5.
After the feature print is complete, press the EXIT button to
exit SelecType.
until
FEATURE PRINT
READY
appears on the display.
message