- ページ 8
スキャナー Epson ActionLaser 1500のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Epson ActionLaser 1500 18 ページ。 Imaging cartridge replacement procedure
Epson ActionLaser 1500 にも： 紙と紙の配達 (11 ページ), インストレーション・マニュアル (7 ページ), 製品サポート速報 (8 ページ), 製品仕様 (1 ページ)
ページを印刷する
4
Attaching the power cord
1. Make sure the power switch at the top right of the printer is
turned off.
2. Insert the power cord into the back of the printer. Then plug
the other end into a properly grounded outlet.
Test printing
1.
Make sure the imaging cartridge is installed. Turn on the
printer. Several messages appear as the printer performs
internal tests. After about 35 seconds, the
appears.
Press the LEVEL 2 button to enter SelecType Level 2.
2.
Press
3.
4.
Press ) twice holding down the button until the display
begins to flash to print the feature print.
5.
After the feature print is complete, press the EXIT button to
exit SelecType.
until
FEATURE PRINT
READY
appears on the display.
message