Cisco Firepower 1120 Manuel d'installation du matériel - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco Firepower 1120. Cisco Firepower 1120 42 pages. Connected grid router
Également pour Cisco Firepower 1120 : Manuel d'installation du matériel (30 pages), Manuel d'installation (6 pages), Manuel de démarrage rapide (10 pages), Manuel (6 pages), Manuel de déploiement (8 pages), Pour commencer (42 pages), Manuel d'installation du matériel (42 pages)

Cisco Firepower 1120 Manuel d'installation du matériel
Rear Panel LEDs
3
SFP
Status of the SFP transceiver:
Link status (L):
• Off—No SFP.
• Amber—SFP present, but no link.
• Green, flashing—Link established and
5
Status
System operating status:
• Off—System has not booted up yet.
• Green, flashing quickly—System is booting
• Green—Normal system function.
• Amber—Critical alarm indicating one or
• Green, flashing slowly (twice in 5
• Green and amber, flashing—Cloud
• Green—Cloud disconnected.
Note
Cisco Firepower 1100 Series Hardware Installation Guide
10
transmitting.
up.
more of the following:
• Major failure of a hardware or software
component.
• Over-temperature condition.
• Power voltage outside the tolerance
range.
seconds)—Cloud connected.
Note
Cisco Defense Orchestrator
(CDO) is valid for FTD 6.7 and
later.
connection failure.
The CDO LED pattern applies to low
touch provisioning (LTP). See the
Firepower Easy Deployment Guide for
Cisco Firepower 1000 or 2100
Firewalls
for more information.
4
Power
Power supply status:
• Off —Power supply off.
• Green—Power supply on.
6
Active
Status of the failover pair:
• Off— Failover is not operational.
• Green—Failover pair operating normally.
The LED is green always unless the chassis
in a high availability pair.
• Amber—When the chassis is in a high
availability pair, the LED is amber for the
standby unit.
Overview